Silway 713 Cement Silane Additive Concrete Waterproofing Admixture

• Customization: Available
• Type: Water Repellent Admixture
• After-sales Service: 24 Hours Online Service
• Model NO.: Silway 713
• Transport Package: 1250kg Drums or According to Customer Request.
• Specification: potassium methylsilicate
• Trademark: HZsilway
• Origin: Zhejiang, China
• Production Capacity: 100tons/Month

Product Description

Description


Silway 713 water repellent is a water-dilutable solution of potassium methyl siliconate designed to impart water repellency to a wide variety of surfaces. Supplied at a concentration of 42 percent in water.

Silway 713 water repellent is usually diluted to a concentration of 3 percent or less before application.

Silway 713 water repellent reacts with carbon dioxide in the air to form an insoluble water-resistant treatment within 24 hours.
 

Product name	potassium methylsilicate  concrete waterproofing    water repellent for building coating
Appearance	Colorless Transparent
Solid Content (90 min at 150 ºC, %)	30
Active Content, %	19
Solvent	water
Specific Gravity (25/25 ºC)	1.25
Application	bricks, sandstone, limestone, and ceramics
Advantage	Low VOC   Water-based system, environmentally friendly Greatly improve the service life of the substrate Excellent waterproof performance and good weather resistance

Key features

---Reduces water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate.

---Colorless and non-yellowing protection preserves the natural appearance of the substrate.

---Penetrating and breathable

---Nonflammable

---Low VOC

Usage

• As a surface treatment Silway 713 is diluted to a concentration of 3 percent solids or less prior to application.
• Do not use concentrations higher than 3 percent solids unless prior testing indicates a necessity. The use of higher concentrations than required may result in the formation of a white residue on the surface. Users should test the concentration to be applied on the substrate prior to use.
• After application of the silicone solution, allow the treated surface to dry for at least 24 hours to develop maximum water repellency. This interval may be shortened somewhat by force-drying at temperatures up to 175°C. While this removes the water quickly, time must be allowed for the curing reaction between Silway 713 and the surface being treated. Carbon dioxide streams do not appear to reduce the cure time appreciably.

Parking and Shipping


About Company

Our customers