Silway744 Water Repellent
Silway 744 is a water-thinnable, solventless emulsion, based on a mixture of silane and siloxane.
Dilute solutions of Silway 744 serve as highquality, general-purpose water repellents for impregnating and priming mineral surfaces.
Moreover Silway 744 can be used for the mass treatment of non-load bearing concrete products.
Good depth of penetration
Resistance to alkalis
Rapid development of water repellency
Provides good adhesion for paints
Water based and environmentally friendly
Stable in storage, even when diluted
Typical Physical Properties
|
Property
|
Specification
|
|
Appearance
|
Milky, white
|
|
Viscosity (cSt, 25ºC)
|
Approx. 12
|
|
Active Content
|
40%
|
|
Density
|
0.95g/cm3
|
|
pH
|
Approx. 8
|
As a water-repellent for absorbent mineral substrates:
Dilute Silway 744 is an excellent water repellent for many absorbent mineral substrates, such as bricks, sand-lime brick, natural sandstone and mineral plasters. It is not so suitable for less absorbent, dense natural stone, especially limestone, marble and reinforced concrete for bridges and roads.
High quality storage stability:
Owing to its aqueous consistency and storage stability when diluted, Silway 744 is ideal for inplant impregnation of building materials made of clay, aerated concrete, sand-lime brick, fibrous cement, mineral fibers and lightweight aggregate.
As a waterproof primer for paints:
Silway 744 may also serve as a water-repellent primer for emulsion paints and plasters, silicone resin emulsion paints and silicone resin plasters. Moreover Silway 744 can be used for the mass treatment of non-load bearing concrete products.
How to use Silway 744
Tap water is suitable for preparing solutions of Silway 744 for use as facade water repellent primer. We recommend an active substance content of 5-10% (dilute the product in the ratio 1:5 to 1:11), the exact figure depending on how absorbent the substrate is.
Apply the ready-to-use solution in the usual way; flooding is the preferred way. Two "wet on wet" coats are needed to ensure complete coverage. Owing to the content of wetting agent in Silway 744, reimpregnation at a later date does not present any difficulties.
COMPANY PORFILE
Hangzhou Silway New Material Technology Co., Ltd. Was established in 2015 and is located on the bank of the beautiful West Lake, Hangzhou, China. Our company has good technology for agricultural additives and industrial additives, and is a high-quality supplier with its own factory and experienced R& D team. Our products are sold all over the world with high quality.
Silway operates in accordance with the modern corporate system, actively establishes a scientific concept of development, adheres to detailed internal management, continuously promotes technological innovation, improves market competitiveness, and actively cultivates a corporate culture with its own characteristics-creating value for customers, creating wealth for society, create profits for the company, create benefits for employees, so that Silway has achieved stable, rapid and sustainable development.
We have been sticking to our commitment with Silway -- the way of silicone innovation for years, and Pursuing innovation of science and technology.
Audited Supplier 
){kind=link}
){kind=link}